HF 2327 Standard w/  Dyna-Lift  Lid Lift Assist
 
HF 2327

Going for High Fire? Then go for the HF 2327. Designed and built with cone 10 in mind, the HF 2327 gets you there with ease and reliability. The chamber dimensions are "typical studio" while the specifications are anything but. All side walls and lid are made with 3" brick for greater efficiency at higher temperatures. The thermocouple is twice as thick for longer, high fire life. Add to this the reliable RampMaster II and you have one tough cone 10 kiln.

The HF 2327 is now available with the Dyna-Lift lid lift assist. The Dyna-Lift lightens the force needed to operate the kiln lid. It does so with ease and grace and with no negative effects upon the kiln itself. Hallmarks of the design include no kiln body connection, single point lifting and emphasis on allowing the lid to act naturally. Click here to learn more.

As with all our RampMaster II equipped kilns the HF 2327 is capable of connection and control via a PC using our KISS Software Package. Monitor and control your kiln(s) as well as collect and graph firing data from the comfort and convenience of your PC. Check it out by clicking here.
 



 


Custom Options
 Swing View Adjustable Control
Handheld RampMaster II Control
 

 

Features, Specifications and Other Fun Stuff


Control Options:

The HF 2327 is standard equipped with the RampMaster II automatic control. The RampMaster II control is our full-featured, automatic temperature control. Multiple programs, multiple programming formats and all sorts of fun stuff make the RampMaster II one fine controller!!
 

Firing Chamber Dimensions and Options:

23.5" diameter x 27" deep - 7.0 cubic feet, (60cm diameter x 69cm deep - 198 litres).
 

Voltage and Phase Configurations:

North American and Global Models:

240V single phase, 48A, 11,520W, USA NEMA 6-50R, Canada Direct Wire
208V single phase, 48A, 9984W, USA NEMA 6-50R, Canada Direct Wire
240V 3Ø (delta), 29A, 11,520W, Direct Wire
208V 3Ø (delta), 26A, 9984W, Direct Wire
 

Suitability:

2350°F (1288°C) Maximum temperature suitable for Ceramic, Porcelain, Pottery and China Firing. Rated for Cone 10!!
 

Recommended Kiln Furniture (Shelving & Posts):

Prepared Furniture Kit #7535
 

Shipping Weight:

330 lb. (150kg)
 

Agency Listings and Markings:

U/L & CU/L listing available on this model. Model features and options may affect listing.
CU/L is a Canadian Listing which is accepted by authorities in all Provinces.
 

Kiln Vent:

Evenheat offers the Orton Downdraft Vent System as an option.
The Orton Vent System is, by far, the finest kiln venting system available.