HF 2927 Standard w/  Dyna-Lift  Lid Lift Assist
 

The HF 2927 is perfect for high fire Studio and Production applications. It features a sectional design that allows for partial  disassembly for easier installation and our new Lift Assist system that makes operating the lid light and easy. The HF 2927 is constructed of 3" brick for greater efficiency at "high fire" temps.

The HF 2927 uses the RampMaster II controller along with a 3 zone controlled design. 3 zone means there are 3 thermocouples controlling separate sections of the kiln. In a kiln of this size this arrangement results in excellent temperature uniformity. It's just beautiful.

The HF 2927 is now available with the Dyna-Lift lid lift assist. The Dyna-Lift lightens the force needed to operate the kiln lid. It does so with ease and grace and with no negative effects upon the kiln itself. Hallmarks of the design include no kiln body connection, single point lifting and emphasis on allowing the lid to act naturally. Click here to learn more.

As with all our RampMaster II equipped kilns the HF 2927 is capable of connection and control via a PC using our KISS Software Package. Monitor and control your kiln(s) as well as collect and graph firing data from the comfort and convenience of your PC. Check it out by clicking here.
 

Features, Specifications and Other Fun Stuff
 

Control Options:

The HF 2927 is standard equipped with the RampMaster II automatic control. The RampMaster II control is our full-featured, automatic temperature control. Multiple programs, multiple programming formats and all sorts of fun stuff make the RampMaster II one fine controller!!
 

Firing Chamber Dimensions and Options:

29" diameter x 27" deep - 10.5 cubic feet, (74cm diameter x 69cm deep - 297 litres).
 

Voltage and Phase Configurations:

North American and Global Models:

240V single phase, 59A, 14,164W, Direct Wire
208V single phase, 69A, 14,352W, Direct Wire
240V 3Ø (delta), 38A, 14,164W, Direct Wire
208V 3Ø (delta), 44A, 14,352W, Direct Wire
 

Suitability:

2350°F (1288°C) Maximum temperature suitable for Ceramic, Porcelain, Pottery and China Firing. Rated for Cone 10!!
 

Recommended Kiln Furniture (Shelving & Posts):

Prepared Furniture Kit #7540
 

Shipping Weight:

430 lb. (195kg)
 

Agency Listings and Markings:

U/L & CU/L listing available on this model. Model features and options may affect listing.
CU/L is a Canadian Listing which is accepted by authorities in all Provinces.

Kiln Vent:

Evenheat offers the Orton Downdraft Vent System as an option.
The Orton Vent System is, by far, the finest kiln venting system available.