Current Production

Rampmaster w/ Express Mode (RM3) - The RM w/ Express Mode (RM3) was introduced in March of 2009. These are the complete, detailed operating instructions as they relate to glass firing.

Rampmaster (RM3) Heat Treating - The RM3 was introduced in March of 2009. These are the complete, detailed operating instructions as they relate to heat treating.

Studio Pro - (Fall 2007 to Current) - The Studio Pro was introduced in the Fall of 2007.

RampMaster II Quick Reference Guide (Winter 2006 to Current) - Quick Start reference card included with all RM II equipped kilns. Gets you going quickly with the bare essentials.

RampMaster II Operators Manual (Winter 2006 to Current) - The RM II was introduced in 1998. These are the complete, detailed operating instructions. When the bare essentials won't do, use this manual.

Set-Pro Operators Manual - The Set-Pro was introduced in 2002 and is currently fitted on new kilns. These are the complete, detailed operating instructions included with all Set-Pro equipped kilns.

Glass Firing Manual - The glass firing manual basically refers to general operating instructions for glass firing. These are very basic in nature and often refer to manual operation of a glass firing kiln. There is some technical data regarding glass firing, however, we do have more comprehensive glass firing data located in our Technical section. Updated Sept 2006

Knife / Heat Treating Oven Users Manual - Operating manual for the KH and KF lines of Knife / Heat Treating Ovens.
Updated June 2009

Orton Vent Master Manual - Complete installation and operations manual for the Orton Vent Master kiln vent system. The Orton vent design changed from the "Plate Mount" version to this new modular style "Vent Master" around March 2005. This manual covers this new modular design.

Copper Jr. Manual - Complete manual for the Copper Jr.
 

Previous Production
 

RampMaster II Operators Manual (1998 to Fall 2005) - The RM II was introduced in 1998. These are the complete, detailed operating instructions. When the bare essentials won't do, use this manual.

Original RampMaster Operators Manual - Models HDTP-56-8 & HDTP-56-55 - The Original RampMaster (RM) was introduced around 1992 and was used until 1999, primarily on glass firing kilns. The original contained 8 segments. An upgraded version containing 55 segments was introduced around 1996. This manual is used for both versions.

Addendum to Original RampMaster (55 segment) - Model HDTP-56-55 - The introduction of the 55 segment RampMaster required an addendum to the original manual. If you have the 55 segment RampMaster you'll need this addendum. Production of the Upgraded RampMaster was ended in 1999.

Perfect Fire Operators Manual - Model DTP-56 - The Perfect Fire (PF) is a single set point temperature control which was in production from 1992 to 1999, primarily on ceramic, pottery and porcelain firing kilns. This manual was included with all new PF kilns.

Addendum to Perfect Fire - The Perfect Fire was modified with additional features in 1998. Production ended in 1999. This version of the control is identified by an "On/Off" switch located directly on the control faceplate. This addendum covers the changes that were made.

Fyrematic Operators Manual - The Fyrematic is simply a devise that increases kiln temperature. If you own a Fyrematic and don't have the operators manual you'll need it. Production of the Fyrematic Series ended in 2007.

TnB Manual - This unique automatic control requires a basic understanding that is well covered in this manual. Production of the TnB Series ended in 2007

DTC 100C - Introduced in 1988, the DTC 100C was Evenheat's first digital control. Production on the DTC 100C was ended in 1992.

DTC 600C - The DTC 600C served as a replacement control for the DTC 100C. No longer available as a replacement.

DTC 800C - The DTC 800C served as a replacement control for the DTC 100C. No longer available as a replacement.

Dawson Kiln Sitter with Limit Timer Manual - Model LT-3K - The Dawson Kiln Sitter has been used on many models of Evenheat Kilns for many years. Routine maintenance is always a good idea and this manual covers everything. A tool known as a "Firing Gauge" is a necessary item when checking the settings of the Kiln Sitter. The manual refers to this gauge. Contact your Evenheat dealer or Evenheat directly for this essential tool. Production of Dawson Kiln Sitter equipped kilns withered away in 2008 as the Dawson Kiln Sitters became difficult to source and support.