evenheat circle large red 100 x 100 at 7
GTS 41.jpg

GTS Features

 
 

        Top Load

 

All GTS models feature our traditional Top Load design.

 
 
Solid State 3.jpg

        Quiet Drive Solid State Relay Option

 

All of our GTS models are available with our optional Quiet Drive Solid State Relay.

It's the job of the relay to turn the heating elements On and Off. A solid state relay can do so up to 120 times per second which allows for incredible temperature control. It also does so without the given, eventual failure of a mechanical relay. We fully expect our solid state relay to last the life of the unit.

We have more to tell you about our solid state relay, our design choices and why you should choose the solid state option. Just click below.

View our Quiet Drive Solid State Relay Info Here

Relay access port 2.jpg

        Relay Access Port

 

All GTS models incorporate our Relay Access Port for simple, no-panel-off relay replacement.

Simply remove the access plate to gain access to the relay(s). There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!

It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

        Multiple Control Options

 

Evenheat works closely with control manufacturers SDS Industries and Bartlett Instruments to bring you the best in performance, features and programming ease.

The GTS models are available with the very popular TAP touchscreen control by SDS Industries as well as the Rampmaster 3 and Set-Pro by Bartlett Instrument.

There's a lot more to know about our controls. Just click below.

View our Controls Info Here

GTS 41 Chamber.jpg
 
 
TAP Splash b.jpg

        Swing View Control Enclosure

 

All temperature controls, except for the Set-Pro, are fitted into our Swing View Adjustable Enclosure.

 

The Swing View is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across the shop. It's that simple.

 

The swing view pairs well with TAP touchscreen control as viewing angle can be perfectly aligned. You'll love it.

 

        Wonderful Handles

At Evenheat we love handles, we always have.

 

Our wide and well placed handles illustrate this affection by offering a secure grip that's corner mounted and easy to operate, even with the gloved hand.

 

We love our handles and you will too!

SP 41 Lid no back.jpg

        Fiber Lid Construction

 

The lid of the GTS 41 is constructed of a special fiber material that provides excellent thermal properties along with light weight. This design allows the heating elements to be positioned on the surface for maximum heat transfer and firing efficiency. We also position these lid heating elements left to right to prevent them from sagging or bunching-up with repeated opening and closing. It's a small but important detail that guarantees performance and satisfaction over the life of the kiln.

This well engineered lid uses a variety of design principles to deliver strength, material support and flex where needed. Strength is provided by the center lid truss and the shrewd use of metal bends. Material support is accomplished via a matrix of refractory rods and buttons. Flex is properly found in the stainless band ringing the lid itself. It works very well.

gts 2541 handle no back.jpg
multi_options-tap_rm3_set-pro.jpg
dyna-lift.jpg

        Dyna-Lift on GTS 2541

The No Damage Lift Assist

Evenheat is proud to offer our patented Dyna-Lift lid lift assist as standard equipment on the GTS 2541.

The Dyna-Lift lightens the force needed to operate the kiln lid. It does so with ease and grace and with no negative effects upon the kiln itself. Hallmarks of the design include no kiln body connection, single point lifting and emphasis on allowing the lid to act naturally.

The Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.

SP 41 Interrupt no back.jpg
gts 2541 side open no back.jpg

        Power Interrupt Switch

 

The GTS 41 is standard equipped with a power interrupt switch which removes electrical power from all heating elements if either the lid or chamber is opened.

 

This is important for those who may access the kiln during firing such as glass manipulation and roll-ups.

        Lid Security Bar

 

Dyna-Lift equipped kilns are provided with a lid prop bar that positively keeps the lid in the open position. Simple one handed operation is made even easier with our well designed lid handle.

The lid security bar is standard equipment on models GTS 2541 and GTS 41.

 

The Lid Security bar is only available when used with the OPTIONAL Dyna-Lift on model GTS 23. It is not a standard feature.

The lid security bar is not availble on the GTS 18.

GTS 23 vent 2 no back.jpg

        3 Position Vent

 

The lightweight lid created by the Dyna-Lift option allows us to offer a 3 position lid vent system. Lid venting helps remove burn-off from adhesives and paints and comes in handy during the cooling process.

 

 

The 3 position lid vent is included with the Dyna-Lift lid lift. It is not a standard feature on non-Dyna-Lift equipped models.

Specifications subject to change without notice or obligation.

PRODUCTS

RESOURCES

CONTACT

OFFICE: 989-856-2281

FOLLOW

OFFICE HOURS; 8:30 - 4:30 EASTERN

FAX: 989-856-4040

This website uses cookies in order to deliver a better user experience. By continuing to use this website, you agree to the Policies & Terms for this website.