top of page
HT Features
Side Door
Cool Touch
Side Opening Door
Heat treating requires the removing of some very hot material from the chamber in order to quench. Everything in the chamber is hot, which includes the door. The doors on the HT's swing out and to the side. This puts the super-heated door well away from you as you concentrate on the work at hand.
The side opening door is an excellent design choice and makes all the difference.


Solid State Option

Cool Touch Handle
The handle/latch on our swing out door is conveniently located at the front of the door, not hidden along the side. This spring loaded, phenolic handle is cool to the touch, is one-handed in design and serves as the door latch as well.
Many thanks to those who have offered feedback on our door handle/latch. We have updated the design to make centering, inserting and all-around operation cleaner and easier!

Multi Control
Quiet Drive Solid State Relay Option
All HT models are available with our optional Quiet Drive Solid State Relay.
It's the job of the relay to turn the heating elements On and Off. A solid state relay can do so up to 120 times per second which allows for incredible temperature control. It also does so without the given, eventual failure of a mechanical relay. We fully expect our solid state relay to last the life of the unit.
We have more to tell you about our solid state relay, our design choices and why you should choose the solid state option. Just click below.
View our Quiet Drive Solid State Relay Info Here


Loud Alarm
Multiple Control Options
Evenheat works closely with control manufacturers SDS Industries and Bartlett Instruments to bring you the best in performance, features and programming ease.
The HT Series models are available with the very popular TAP touchscreen control by SDS Industries as well as the Rampmaster 3 by Bartlett Instrument.
There's a lot more to know about our controls. Just click below.
View our Controls Info Here


Loud Alarm Output Jack
HT models are standard equipped with a Loud Alarm Output Jack for use with our Loud Alarm Option.
All of our controls feature an audible alarm. These alarms let you know when you've reached temperature, and more importantly, when it's time to quench. These alarms however, aren't really loud enough to break through the noise found in a working shop. In response, we've included an alarm output jack on the bottom of the control enclosure that allows you to plug in our Loud Alarm (sold separately). Just plug it in and enjoy 80db of irritating alarm bliss.
You can purchase the Loud Alarm here:


Relay Access Port
More

Relay Access Port
All HT models incorporate our Relay Access Port for simple, no-panel-off relay replacement.
Simply remove the access plate to gain access to the relay. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!
It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.


Swing View Control Enclosure
All temperature controls, except for the Set-Pro, are fitted into our Swing View Adjustable Enclosure.
The Swing View is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across the shop. It's that simple.
The swing view pairs well with TAP touchscreen control as viewing angle can be perfectly aligned. You'll love it.


Door Shield
The HT's feature a door shield to provide protection against firebrick damage as well as to reduce the temperature seen at the door and door handle.


2000°F (1093°C) Maximum Temperature
The maximum usable temperature for the HT models is 2000°F (1093°C). This maximum is well within the range for the vast majority of steels used by knife makers, 3D Printrs and machine shops.


Power Interrupt Switch
The Power Interrupt Switch removes power from all heating elements as the door is opened and reapplies power as the door is closed.
The switch used for this feature is a true safety switch and is designed specifically for safety applications. This safety switch will literally tear apart and open any welded or stuck contacts - true safety!


Strong Stand and Tool Rest
The stands of the HT's have been upgraded to a stronger design and include a tool rest.
Cool!

bottom of page