top of page
KF Extreme Features
Chamber Depth
Chamber Depths From 31.5" to 49.5"
The KF Extreme Series are designed for long work such as Damascus steel production, firearm barrels and of course swords and beyond.
Chamber depths start at 31.5" and go all the way to 49.5" - in 4.5" increments.


Side Only
Solid State Option
Side-Only Heating Elements
KF Extreme Depth models are designed with side-only heating elements. This is the same design that is used in our LB Series that provides excellent temperature distribution along the entire length of the chamber.


Quiet Drive Solid State Relay Option
All KF Extreme depth models are available with our optional Quiet Drive Solid State Relay.
It's the job of the relay to turn the heating elements On and Off. A solid state relay can do so up to 120 times per second which allows for incredible temperature control. It also does so without the given, eventual failure of a mechanical relay. We fully expect our solid state relay to last the life of the unit.
We have more to tell you about our solid state relay, our design choices and why you should choose the solid state option. Just click below.
View our Quiet Drive Solid State Relay Info Here

Dual Door
Multiple Control Options
Relay Access Port
Dual Side Opening Doors
The extra deep chambers of the KF Extreme's require the use of dual doors front and back.



More
Multiple Control Options
Evenheat works closely with control manufacturers SDS Industries and Bartlett Instruments to bring you the best in performance, features and programming ease.
The KF Extreme Depth Series models are available with the very popular TAP touchscreen control by SDS Industries as well as the Rampmaster 3 by Bartlett Instrument.
There's a lot more to know about our controls. Just click below.
View our Controls Info Here

Relay Access Port
All KF Extreme models incorporate our Relay Access Port for simple, no-panel-off relay replacement.
Simply remove the access plate to gain access to the relay. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!
It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.




Cool Touch Handles
The handles/latches on our swing out door are conveniently located at the front of the doors, not hidden along the side. These spring loaded, phenolic handles are cool to the touch, one-handed in design and serve as the door latch as well.
Many thanks to those who have offered feedback on our door handle/latch. We have updated the design to make centering, inserting and all-around operation cleaner and easier!


Loud Alarm Output Jack
KF Extreme models are standard equipped with a Loud Alarm Output Jack for use with our Loud Alarm Option.
All of our controls feature an audible alarm. These alarms let you know when you've reached temperature, and more importantly, when it's time to quench. These alarms however, aren't really loud enough to break through the noise found in a working shop. In response, we've included an alarm output jack on the bottom of the control enclosure that allows you to plug in our Loud Alarm (sold separately). Just plug it in and enjoy 80db of irritating alarm bliss.
You can purchase the Loud Alarm here:


Swing View Control Enclosure
All temperature controls, except for the Set-Pro, are fitted into our Swing View Adjustable Enclosure.
The Swing View is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across the shop. It's that simple.
The swing view pairs well with TAP touchscreen control as viewing angle can be perfectly aligned. You'll love it.


Door Shield
The KF Extreme's feature a door shield to provide protection against firebrick damage as well as to reduce the temperature seen at the door and door handle.


2200°F (1204°C) Maximum Temperature
The maximum usable temperature for the KF Extreme Depth models is 2200°F (1204°C). This maximum is well within the range for the vast majority of steels used by knife makers and machine shops.
This maximum temperature is limited by the heating element wire used. We use a Sandvik Nickel-Chrome alloy wire for all KF model heating elements. This alloy has proven to last, it tends to stay put and generally plays very nice when used at temps below 2200°F.


Strong Stand and Tool Rest
The stands of the KF Extreme Depth models have been upgraded to a stronger design and include a tool rest.
Cool!

bottom of page