top of page
KF Series
The KF Series of heat treat ovens were developed for both private and business use. Operating from 240V, and reaching temperatures up to 2200°F, the KF models are well suited to heat treat the vast majority of steels common to knife makers and metal workers.
The KF Series heat treat ovens are the original design that has heating elements in the back wall. You'll also want to check out our LB Series which is designed with side-only heating elements.
The KF's are available in a variety of control choice options as well as the solid state output option (which you want).
See below for available models and check out the Features tab for in-depth details on all KF Series features.
KF Models
KF 13.5
KF 18
KF 13.5
The KF 13.5 is our shallowest model in the KF Series. It offers the small folder maker and machinist the power and performance of 240V in a fairly compact package.
13.5" Deep x 10" Wide x 6.5" High
240V, 13A, 3120W
2200°F Maximum Temperature
View Full Specs Here
KF 22.5
KF 18
The KF 18 is our most popular KF Series heat treat oven. It's depth and ample power make it a perfect fit for both private and low volume knife makers and heat treaters.
18" Deep x 10" Wide x 6.5" High
240V, 13A, 3120W
2200°F Maximum Temperature
View Full Specs Here
KF 27
KF 22.5
The KF 22.5 runs a very close second in popularity. It's a bit deeper than the KF 18 while offering an added bump in total power. If you're looking for a little bit more depth, this is it.
22.5" Deep x 10" Wide x 6.5" High
240V, 15A, 3600W
2200°F Maximum Temperature
View Full Specs Here
KF 27
The KF 27 is our deepest KF model at 27" deep. Chosen primarily for use with higher volume heat treating the KF 27 offers plenty of room before having to move into the KF Extreme Depth Series.
27" Deep x 10" Wide x 6.5" High
240V, 15A, 3600W
2200°F Maximum Temperature
View Full Specs Here
We offer the KF Series ovens in deeper designs that we call KF Extreme Depth.
These models range from 31.5" to 49.5" deep and are built with dual doors.
KF Extreme Depth Information
bottom of page