evenheat circle large red 100 x 100 at 7

RM II Series Features


        Cone 8 Daily - Most Models


Most of our RM II Series models are built to achieve a cone 8 on a daily basis.

Models 2522 and 2541 are limited to 2000°F - Cone 03.

evenheat circle large red 100 x 100 at 7
evenheat-circle-e red.png
TAP Splash b.jpg

        Swing View Control Enclosure


All temperature controls, except for the Set-Pro, are fitted into our Swing View Adjustable Enclosure.


The Swing View is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across the studio. It's that simple.


The swing view pairs well with TAP touchscreen control as viewing angle can be perfectly aligned. You'll love it.

evenheat circle large red 100 x 100 at 7
Solid State CER lr.jpg

        Quiet Drive Solid State Relay Option


RM II models are available with our optional Quiet Drive Solid State Relay.

It's the job of the relay to turn the heating elements On and Off. A solid state relay can do so up to 120 times per second which allows for incredible temperature control. It also does so without the given, eventual failure of a mechanical relay. We fully expect our solid state relay to last the life of the unit.

We have more to tell you about our solid state relay, our design choices and why you should choose the solid state option. Just click below.

View our Quiet Drive Solid State Relay Info Here

evenheat circle large red 100 x 100 at 7

        Multiple Control Options


Evenheat works closely with control manufacturers SDS Industries and Bartlett Instruments to bring you the best in performance, features and programming ease.

RM II Series models are available with the very popular TAP touchscreen control by SDS Industries as well as the Rampmaster II, Set-Pro and Genesis by Bartlett Instrument.

There's a lot more to know about our controls. Just click below.

View our Controls Info Here

evenheat circle large red 100 x 100 at 7

        Relay Access Port


All RM II models incorporate our Relay Access Port for simple, no-panel-off relay replacement.

Simply remove the access plate to gain access to the relay. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!

It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

evenheat circle large red 100 x 100 at 7
Relay Access CER lr.jpg
Peephole Open.jpg

        Swing-away Peephole Covers


Our kiln designs feature swing-away peephole covers as opposed to plugs.


Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.

evenheat circle large red 100 x 100 at 7

        Wonderful Handles


We love handles. Handles have to be properly sized and shaped for the job. Our lid handles makes this point by offering an 13" handle that's easy to grasp and operate. These wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.

evenheat circle large red 100 x 100 at 7
rm22329 handle no back.jpg
rm22329 vent no back.jpg

        2 Position Lid Vents


RM II models are equipped with  2 position lid vents.

Models 2522 and 2541 do not include this feature.

evenheat circle large red 100 x 100 at 7
RM2 2322 prop no back.jpg
rm22329 side no back.jpg

        Lid Security Bar


RM II models are provided with a lid prop bar that positively keeps the lid in the open position. Simple one handed operation is made even easier with our well designed lid handle.

evenheat circle large red 100 x 100 at 7

        Single, Maintenance Line & Full Jackets


Our 29" deep models feature a "Maintenance Line".


The Maintenance Line is a split in the jacket that allows these models to be partially disassembled for ease in element replacement and kiln installation.


The Maintenance Line is held securely in place through the use of stainless steel plates and screws. Simply remove the screws and separate the sections for maintenance or installation.


We do not use buckles to hold the sections together as they tend to loosen and allow shifting during loading, unloading and use.

evenheat circle large red 100 x 100 at 7