top of page
evenheat circle large red 100 x 100 at 7
SB 818 front.jpg

Salt Bath Build Options

Voltage Options
Voltage Phase Options
evenheat-circle-e red.png

        Voltage Options

 

Our default production for Salt Bath Series models is 120V for model SB 709 and 240V, Single Phase for models SB 718 and SB 818.

 

We do offer to build some Salt Bath models​ in 208V, 220V and 230V by request. Please contact us for detailed information.

The TAP control on the Salt Bath models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.

Evenheat recommends that you check your operating voltage before ordering or placing the salt bath kiln in service.

evenheat circle large red 100 x 100 at 7
evenheat-circle-e red.png

        Voltage Phase Options

 

Salt Bath models models are produced in a single phase design only.

3 phase Delta and Y (380V, 400V and 415V) designs are not available.

3 phase designs require the circuit be divided into 3 loads or circuits, as it were. The Salt Bath Series models contain 1 or 2 heating circuits. So, no-go on that.

evenheat circle large red 100 x 100 at 7
bottom of page