Salt Bath Specifications
Salt Bath 709 Specifications

Chamber Dimensions
Outer Dimensions
Maximum Temperature
Electrical
Salt Pot Suggestion
Shipping Weight
Shipping Method
7" Wide x 7" Long x 9" Deep - 0.26 Cubic Feet
(17.8cm Wide x 17.8cm Long x 22.9cm Deep - 7.4L)
18" Wide x 13" Long x 23" Deep (includes the 8" stand)
(45.7cm Wide x 33.0cm Long x 58.4cm Deep)
2000°F (1093°C)
120 Volts, 18 Amps, 2160 Watts, 60Hz, Single Phase
Power Cord Plug Configuration - NEMA 5-20
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Model will operate properly on both 50Hz and 60Hz
Model not available in 3 phase Delta or Y designs
Will accept salt pots up to 5.5" OD. Thinner, schedule 40 316 Stainless Steel is preferred.
Salt pot depth should be close to 13".
Salt pot must be grounded. See manual for details.
60lb. (27.3Kg) - Approx.
Freight Truck
Salt Bath models may contain chemicals known to the State of Calfornia to cause cancer and birth defects or other reproductive harm.
Salt Bath 718 Specifications

Chamber Dimensions
Outer Dimensions
Maximum Temperature
Electrical
Salt Pot Suggestion
Shipping Weight
Shipping Method
7" Wide x 7" Long x 18" Deep - 0.51 Cubic Feet
(17.8cm Wide x 17.8cm Long x 45.7cm Deep - 14.4L)
18" Wide x 13" Long x 32" Deep (includes the 8" stand)
(45.7cm Wide x 33.0cm Long x 81.3cm Deep)
2000°F (1093°C)
240 Volts, 18 Amps, 4320 Watts, 60Hz, Single Phase
Power Cord Plug Configuration - NEMA 6-20
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Model is available in 230V
Model will operate properly on both 50Hz and 60Hz
Model not available in 3 phase Delta or Y designs
Will accept salt pots up to 5.5" OD. Thinner, schedule 40 316 Stainless Steel is preferred.
Salt pot depth should be close to 22".
Salt pot must be grounded. See manual for details.
110lb. (55Kg) - Approx.
Freight Truck
Salt Bath models may contain chemicals known to the State of Calfornia to cause cancer and birth defects or other reproductive harm.
Salt Bath 818 Specifications

Chamber Dimensions
Outer Dimensions
Maximum Temperature
Electrical
Salt Pot Suggestion
Shipping Weight
Shipping Method
8" Wide x 8" Long x 18" deep - 0.67 Cubic Feet
(20.3cm Deep x 20.3cm Wide x 45.7cm High - 18.9L)
19" Wide x 14" Long x 32" High (includes the 8" stand)
(48.3cm Deep x 35.6cm Wide x 45.7cm High)
2000°F (1093°C)
240 Volts, 30 Amps, 7200 Watts, 60Hz, Single Phase
Power Cord Plug Configuration - NEMA 6-50
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Model is available in 230V
Model will operate properly on both 50Hz and 60Hz
Model not available in 3 phase Delta or Y designs
Will accept salt pots up to 6.5" OD. Thinner, schedule 40 316 Stainless Steel is preferred.
Salt pot depth should be close to 22".
Salt pot must be grounded. See manual for details.
125lb. (57Kg) - Approx.
Freight Truck
Salt Bath models may contain chemicals known to the State of Calfornia to cause cancer and birth defects or other reproductive harm.