evenheat circle large red 100 x 100 at 7
SP17 RM.jpg

Studio Pro Features

 
 
 
 
SP17 RM.jpg

        Front Access

 

One of the defining features of the Studio Pro design is its Front Access. Simply lift the chamber away to expose the entire floor.

 

Front access is perfect for glass placement, particularly with glass that can't be disturbed once placed. Simply build on your shelf and close the chamber. Front access is also great when using manipulation tools that require a horizontal approach such as raking or glass roll ups.

Studio Pro Front open1 no back.jpg

        Top Access

 

All Studio Pro models also have top access as part of our Dual Access design!

 

Top access is excellent for venting. Top access also works very well when loading forms and comes in very handy when using manipulation tools that require a vertical approach such as glass embossing.

SP 14 front open 3 no back.jpg

        Wall-Free Design

 

With front access, the Studio Pro kilns offer the artist a wall-free work surface.

 

The wall-free design provides wide open space for the precision placement of your glass. There's nothing to fight or work around. It's an incredible design feature that further defines the Studio Pro Series.

quiet-drive.jpg

        Quiet Drive Solid State Relay Option

 

Studio Pro 14 and Studio Pro 17 are available with our optional Quiet Drive Solid State Relay.

It's the job of the relay to turn the heating elements On and Off. A solid state relay can do so up to 120 times per second which allows for incredible temperature control. It also does so without the given, eventual failure of a mechanical relay. We fully expect our solid state relay to last the life of the unit.

We have more to tell you about our solid state relay, our design choices and why you should choose the solid state option. Just click below.

View our Quiet Drive Solid State Relay Info Here

 
TAP Splash b.jpg

        Swing View Control Enclosure

 

All temperature controls, except for the Set-Pro, are fitted into our Swing View Adjustable Enclosure.

 

The Swing View is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across the shop. It's that simple.

 

The swing view pairs well with TAP touchscreen control as viewing angle can be perfectly aligned. You'll love it.

 
Relay access port 2.jpg

        Relay Access Port

 

All Studio Pro models incorporate our Relay Access Port for simple, no-panel-off relay replacement.

Simply remove the access plate to gain access to the relay(s). There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!

It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

 
Studio Pro STP front closed no back.jpg

        Bench Top Operation

 

The Studio Pro personal kilns are designed to be placed directly on your counter or bench top or within the included floor stand (Studio Pro 14 and Studio Pro 17). The choice is yours.

Bench top operation positions the kiln at waist level for very comfortable front access use.

Please note that counters and bench tops must be constructed of non-combustible material and be capable of supporting the load of the kiln.

SP 17 RM3 Lid.jpg

        Studio Pro 17 Elemented Fiber Lid

 

Evenheat's fiber lid construction offers a faster heat-up than traditional 120V firebrick designs, about 50% faster. This faster firing potential reduces or completely eliminates devitrification.

 

The lid of the Studio Pro 17 is constructed of a special fiber material that provides excellent thermal properties along with light weight. This design allows the heating elements to be positioned on the surface for maximum heat transfer and firing efficiency.

 

We also position these lid heating elements left to right to prevent them from sagging or bunching-up with repeated opening and closing. It's a small but important detail that guarantees performance and satisfaction over the life of the kiln.

​​

multi_options-tap_rm3_set-pro.jpg

        Multiple Control Options

 

Evenheat works closely with control manufacturers SDS Industries and Bartlett Instruments to bring you the best in performance, features and programming ease.

Studio Pro Series models are available with the very popular TAP touchscreen control by SDS Industries as well as the Rampmaster 3 and Set-Pro by Bartlett Instrument.

There's a lot more to know about our controls. Just click below.

View our Controls Info Here

SP 17 RM3 Front Open Straight.jpg

        Power Cords Exit to the Rear

 

The power cables on the Studio Pro's exit the control panel to the rear. This keeps them away from the kiln chamber while keeping your work area free of clutter.

It's a very minor detail but one that we haven't overlooked.

SP 17 RM3 Open Stand.jpg

        Floor Stands

 

The Studio Pro 14 and Studio Pro 17 are supplied with 16" stands for optional floor placement if desired.

 

Model Studio Pro STP is not supplied with a floor stand and is designed to be placed on a non-combustible bench or counter top.

        Multi-Position Lid Vents

Lid venting is great when you're firing off adhesives or binders. It's also great for speeding up the cooling process.

 

The lid vent on the Studio Pro STP positions the lid at approximately 1/2" and 1". Just lift and swivel to the height you want.

The lid vent on the Studio Pro 14 positions the lid at approximately 1" and 1-3/4".

Specifications subject to change without notice or obligation.

PRODUCTS

RESOURCES

CONTACT

OFFICE: 989-856-2281

FOLLOW

OFFICE HOURS; 8:30 - 4:30 EASTERN

FAX: 989-856-4040

This website uses cookies in order to deliver a better user experience. By continuing to use this website, you agree to the Policies & Terms for this website.