V8 Vitrigraph
You just found the ultimate Vitrigraph kiln. The Evenheat V8 was designed specifically as a vitrigraph kiln with features found nowhere else.
The V8 is built with an 8" x 8" chamber that positions the thermocouple out of the way so pots as large as 7-1/2" in diameter can be used. The glass exit point is sized for reliable and easy access to pull cane.
Controls are placed in a pivoting enclosure which allows you to rotate the control up and down for perfect viewing whether you're down-low, in the middle or up-high.
Our floor stand includes a tool shelf and rod/cane holder for that extra hand you always wish you had. They also include a thoughtful power cord catch that keeps the power cord safe and out of the way.
Stands also provide massive clearance to do your work offering 14-1/2" from the glass exit point to the wall and a wonderfully long 37-1/2" of downward movement from the glass exit point to our stand base. You won't be crowded as you work. Nice!
You just found the Evenheat V8.
You just found the ultimate vitrigraph kiln.
Features
V8 Vitrigraph Floor
The V8 Vitrigraph floor includes a large 2-3/4" hole machined into the base to act as the glass exit point for vitrigraph work and offers plenty of room for tools.
Vitrigraph Pots up to 7-1/2" in Diameter
Usable floor space is always good and the V8 offers the most usable floor space of kilns this size. This extra usable floor space is made possible by positioning the thermocouple (temperature sensor) at the corner of the chamber as opposed to the flat side.
Vitrigraph pots up to 7-1/2" diameter can be used. This means more volume per session without the re-load and wait. Pot size is no small detail and we're pleased to offer more room.
Stackable Design
The V8 Vitrigraph is designed in a stackable format. This allows the artist to easily move the V8 from storage to stand, and back again, in a matter of minutes.
Stackable also makes positioning the kiln that much easier as each piece is placed independently.
Swing View Equipped
V8 temperature controls are fitted to our Swing View Adjustable Enclosure.
The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle.
The swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.
It Swings Down Too!
Vitrigraph kilns and controls are often placed above eye level making the controls more difficult to see and use. Not anymore.
We modified our swing view feature on the V8 Vitrigraph to allow the control to also swing downward for easier use when the V8 is elevated.
This is our favorite feature! It just makes so much sense and works so well.
V8 Vitrigraph Stand
Welcome to the finest vitrigraph stand on the planet.
The V8 stand was designed from the ground up to offer helpful features including a tool rest, rod/cane holder and power cord catch. All of which you need and all found right here.
The Evenheat V8 stand offers 14-1/2" of distance between the glass exit point and the stand upright. Room enough to pull cane but also room enough to lay glass-on-glass for some amazing work. There's lots of room here to create.
The V8 stand also provides 37-1/2" between the glass exit point and the stand base. More opportunity to create.
Hand's down, Evenheat's V8 vitrigraph stand is the finest vitrigraph stand available.
V8 Vitrigraph Wall-Mounted Stand
Need more vertical room to create? The V8 vitrigraph wall-mounted stand allows you to position the stand on a wall surface at the height you desire.
Based on the same sturdy platform as our standing model, the wall-mounted V8 vitrigraph stand allows you to position your V8 stand on a wall for increased length of pull and flexibility.
The wall-mounted stand shares the same 14-1/2" distance between the glass exit point and wall as the the standing model. The wall-mounted stand also shares the power cord catch designed to keep the power cord well out of your way.
The downward positioning feature of the swing view control really comes in handy when using the wall-mounted stand.
As a bonus, the wall-mounted V8 stand folds down against the wall when not in use!
Relay Access Port
The V8 incorporates our Relay Access Port for simple, no-panel-off relay replacement.
Simply remove the access plate to gain access to the mechanical relay. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!
It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.
Firebrick Construction
The V8 Vitrigraph is constructed entirely of firebrick. Any repairs are easy, possible and reasonably inexpensive.
The same can be said of the heating element. Easy enough to remove and easy enough to replace all without breaking the bank.
Our kilns are designed to allow for easy maintenance and repair without major hassle or cost. The V8 is no different.
120V Standard Plug
The V8 Vitrigraph operates from 120V and is equipped with a standard North American 120V plug. Connection is very easy.
We do allow the use of extension cords to provide power to the V8. This is particularly useful as vitrigraph kilns are generally in stands or are elevated. We do require use of extension cords that are at least a #12AWG and 12 foot (4m) or less. They must also be of the 3 wire, grounded style.
We do make the V8 Vitrigraph in global voltages as well, by request. Please see the Build Options section below for details.
Build Options
Multiple Control Options
The V8 Vitrigraph is available in a variety of controls including the Icon, Icon+, Tap II and Rampmaster 3.
The V8 is most often purchased with the Icon control.
At Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps. Visit our Controls tab to learn more about our controls and why they represent the very best that you can get.
Quiet Drive Solid State Relay Option
The V8 Vitrigraph is available with our Quiet Drive Solid State Relay option.
Our Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. The Quiet Drive is arguably the best designed and best performing solid state system on the market.
Voltage Options
Our default production for V8 Vitrigraph is 120V, Single Phase.
We do offer to build in 100V, 200V, 208V, 220V, 230V and 240V by request.
All controls available on the V8 Vitrigraph will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.
Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.
Voltage Phase Options
The V8 Vitrigraph is produced in a single phase design only.
3 phase Delta and Y (380V, 400V and 415V) designs are not available.
Specifications
V8 Vitrigraph
Chamber Dimensions:
8" L x 8" W x 6.5" D - 0.24 Cubic Feet
(20.3cm L x 20.3cm W x 16.5cm D - 6.8L)
Outside Dimensions:
13" L x 18" W x 14.5" H
(33cm D x 45.7cm W x 36.8cm H)
Maximum Use Temperature:
2300°F (1260°C)
Standard Electrical:
120 Volts, 14 Amps, 1680 Watts, 50/60Hz, Single Phase
Power Cord Plug Configuration - NEMA 5-15
Available in 100V, 200V, 208V, 220V, 230V and 240V by request
Operates properly on both 50Hz and 60Hz
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Weight:
35lb. (16Kg) - Approx. without stands
Shipping Method:
UPS
California Prop 65
V8 Vitrigraph models may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Accessories
V8 Vitrigraph Stand
The V8 can be ordered with stand. However, for those of you who have a V8 without the stand we offer it here.
The V8 vitrigraph stand offers 14-1/2' from glass exit to stand upright and 37-1/2" from glass exit to stand base. Both distances give an incredible amount of space for vitrigraph cane and glass-on-glass work.
The stand features a tool rest placed right where you need it and a cane/rod holder directly in front for ease of use. Also included is a power cord catch that positions the V8 power cord to the back and down to get it out of the way.
Constructed of 18ga. steel and fitted with a flat-panel base for added stabilty.
Our V8 vitrigraph stand is the finest example of a vitrigraph stand available.
The V8 Vitrigraph stand is intended for use with an Evenheat model V8 only. We do not guarantee fit, function or compatibility with other manufacturer models.
V8 Vitrigraph Wall Mounted Stand
The V8 can be ordered with the Wall Mounted stand. However, for those of you who have a V8 without the wall mounted stand we offer it here.
The V8 vitrigraph wall-mounted stand allows you to position the V8 on a wall at the height you desire. Glass exit point to wall is 14-1/2" allowing for an incredible amount of room to create.
Mounting holes are a friendly 16" wide to fit typical wall-stud spacing. Constructed of 18ga. steel and fitted with a power cord catch to keep the power cord back and out of the way.
The V8 vitrigraph wall-mounted stand can be folded down during periods of non-use
The V8 Vitrigraph wall-mounted stand is intended for use with an Evenheat model V8 only. We do not guarantee fit, function or compatibility with other manufacturer models.
V8 Base without Vitrigraph Hole
The V8 can be used for a variety of purposes including other glass and ceramic/pottery work. We offer this base for those who would like the ability to convert their V8 for these additional uses.
V8 Base with 2.75" Vitrigraph Hole
V8 base with 2.75" hole for glass Vitrigraph use.
Studio Pro Furniture Kit
1 - 7.25" x 7.25" Shelf
4 - 1/2" Posts
1 - 6 Reed Haik Brush (not as shown)
1 - 24oz. Shelf Primer - Hotline Hi-Fire Brand
The V8 Vitrigraph is a multi-purpose kiln and can be used for typical glass and ceramic/pottery firing. This furniture kit will give you everything you need for this type of work.
Studio Pro Shelf
Shelf - 7.25" x 7.25"
Posts
We offer shelf posts ranging from 1/2" to 6". In general you will always want to post up your firing shelf. We recommend using at least a 1/2" post.
Haik Brushes
Our Brushes are a wide and very soft brush used to apply shelf primer.
Shelf Primer - 24oz. (Dry)
Shelf primer creates a layer of protection between the kiln shelf and your glass as it prevents your glass from sticking to the shelf. It is generally applied using a soft brush like our Haik brush. It can also be airbrushed on with the proper equipment.
Our shelf primer of choice is a Hotline product called Hi-Fire. It's supplied in dry form and is mixed with water for application onto the kiln shelves.