HF 810
The HF 810 is designed for china and porcelain painting and all clays up to cone 8 (2300°F/1260°C).
The HF 810 is built with thicker, 3" firebrick which allows it to get to temperature with ease. Its small size and 120V operation make it perfect for the casual and private studio. It's also comes in very handy as a test kiln.
The RM 810 features our TAP II, Icon+, Icon and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.
Order yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.
Features
Top Load
The HF 810 is a top loading design and offers a chamber 11.25" diameter x 9" deep. The HF 810 is built with 3" firebrick allowing it to reach temperature easier.
Wonderful Lid Handle
We love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an 8" handle that's easy to grasp and operate.
These wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.
2 Position Lid Vent
The HF 810 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.
Swing View Equipped
The HF 810 temperature controls are fitted to our Swing View Adjustable Enclosure.
The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.
The swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.
3" Firebrick with No Loss in Chamber Volume
Historically kiln designs were based on 2-1/2" firebrick. As 3" firebrick began to show favor in high temperature designs many kiln manufacturers simply reduced the firing chamber size to accommodate the thicker firebrick while leaving the outside dimensions the same.
At Evenheat we took a different direction. Instead of making the chamber smaller we kept it the same while increasing the outside dimensions. In this way there is no loss in chamber volume and common, standard kiln furniture would continue to fit. Nice.
Swing-Away Peephole Covers
Our kiln designs feature swing-away peephole covers as opposed to plugs.
Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.
Lid Prop
The HF 810 is provided with a lid prop bar that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.
Relay Access Port
The HF 810 incorporates our Relay Access Port for simple, no-panel-off relay replacement.
Simply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!
It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.
Full Stainless Steel Jackets
Multi-section, multi-jacketed kilns were conceived to lower production costs for the kiln manufacturer and to make life easier for the person installing the kiln. These are worthy goals but they come at the cost of kiln quality. It's a trade off we're not willing to make.
We build our kilns with full stainless jackets from top to bottom. Full stainless jackets mean absolutely solid, life extending construction. There are no leaks, no shifting and no weakness. Insist on Full Stainless Jackets for true build quality.
Build Options
Multiple Control Options
The HF 810 is available in a variety of controls including the Icon, Icon+, Tap II and Rampmaster II.
At Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps. Visit our Controls tab to learn more about our controls and why they represent the very best that you can get.
Quiet Drive Solid State Relay Option
The HF 810 is available with our Quiet Drive Solid State Relay option.
Our Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!
Voltage Options
Production for the HF 810 is 120V.
All controls available on the HF 810 will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.
Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.
Voltage Phase Options
The HF 810 is not available in 3 phase Delta or Wye.
Specifications
HF 810
Chamber Dimensions:
11.25" Diameter x 9" Deep - 0.57 Cubic Feet
(28.6cm Diameter x 22.9cm Deep - 16.1L)
Outside Dimensions:
23.50" D x 17.25" W x 23" H (with 8" stand)
(59.7cm D x 43.8m W x 58.2cm H)
Maximum Use Temperature:
2300°F (1260°C) / Cone 8
Standard Electrical:
120 Volts, 18 Amps, 2160 Watts, 50/60Hz, Single Phase
(Requires a Fully Rated 20A Breaker)
Power Cord Plug Configuration - NEMA 5-20
Operates properly on both 50Hz and 60Hz
Not Available in 3 phase Delta or Wye designs
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Weight:
55lb. (25Kg) - Approx.
Shipping Method:
Freight Truck
NRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499
California Prop 65
HF 810 models may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Accessories
HF 810 Furniture Kit
Posts
We offer shelf posts ranging from 1/2" to 6".
Haik Brushes
Our Brushes are a wide and very soft brush used to apply shelf primer.
Kiln Wash - 1lb (Dry)
Kiln wash creates a layer of protection between the kiln shelves and your ceramic ware as it prevents your ware from sticking to the shelf. It is generally applied using a soft brush like our Haik brush. It can also be airbrushed on with the proper equipment.
Our kiln wash is made in-house. We've been told it's some of the best there is. It's supplied in dry form and is mixed with water for application onto the kiln shelves.