RM 2929
Designed and built for large working studios, production houses and centers of learning the RM II 2929 delivers on size, features and performance.
The RM 2929 features our TAP II, Icon+ and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.
Order yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.
Features
Top Load
The RM 2929 is a top loading design and offers a chamber 29" diameter x 29" deep.
Wonderful Lid Handle
We love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an 16" handle that's easy to grasp and operate.
These wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.
2 Position Lid Vent
The RM 2929 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.
Swing View Equipped
The RM 2929 temperature controls are fitted to our Swing View Adjustable Enclosure.
The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.
The swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.
Swing-Away Peephole Covers
Our kiln designs feature swing-away peephole covers as opposed to plugs.
Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.
Lid Prop
The RM 2929 is provided with a lid prop bars that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.
Relay Access Port
The RM 2929 incorporates our Relay Access Port for simple, no-panel-off relay replacement.
Simply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!
It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.
Single Maintenance Line & Full Jackets
Our 29" deep models feature a "Maintenance Line". The Maintenance Line is a split in the jacket between the upper and lower chamber that allows these models to be partially disassembled for ease in element replacement and kiln installation.
The upper chamber section is held securely in place through the use of stainless steel plates and screws. Simply remove the screws and separate the sections for maintenance or installation.
We do not use buckles to hold the sections together as they tend to loosen and allow shifting during loading, unloading and use.
Build Options
Multiple Control Options
The RM 2929 is available in a variety of controls including the Icon+, Tap II and Rampmaster II.
At Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps. Visit our Controls tab to learn more about our controls and why they represent the very best that you can get.
Quiet Drive Solid State Relay Option
The RM 2929 is available with our Quiet Drive Solid State Relay option.
Our Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!
Voltage Options
Our default production for the RM 2929 is 240V, Single Phase.
We do offer to build in 220V, 230V, 380V, 400V and 415V by request.
All controls available on the RM 2929 models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.
Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.
Voltage Phase Options
The RM 2929 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.
Specifications
RM 2929
Chamber Dimensions:
29" Diameter x 29" Deep - 11.3 Cubic Feet
(73.7cm Diameter x 73.7cm Deep - 320L)
Outside Dimensions:
40" D x 34" W x 42" H (with 8" stand)
(102cm D x 86.4 W x 107cm H)
Maximum Use Temperature:
2300°F (1260°C) / Cone 8
Standard Electrical:
240 Volts, 56 Amps, 13,440 Watts, 50/60Hz, Single Phase
Direct Wired
Available in 220V and 230V by request
Available in 3 phase Delta and Wye (380V, 400V, 415V) by request
Operates properly on both 50Hz and 60Hz
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Weight:
320lb. (145Kg) - Approx.
Shipping Method:
Freight Truck
NRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499
California Prop 65
RM 2929 models may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Accessories
RM 2929 Half Shelf (26")
Posts
We offer shelf posts ranging from 1/2" to 6".
Haik Brushes
Our Brushes are a wide and very soft brush used to apply shelf primer.
Kiln Wash - 1lb (Dry)
Kiln wash creates a layer of protection between the kiln shelves and your ceramic ware as it prevents your ware from sticking to the shelf. It is generally applied using a soft brush like our Haik brush. It can also be airbrushed on with the proper equipment.
Our kiln wash is made in-house. We've been told it's some of the best there is. It's supplied in dry form and is mixed with water for application onto the kiln shelves.